Gravely Atlas JVS High-Clearance 1.5″ Rear Offset A-Arms

Dont Skip Our Gravely Atlas Rear A-Arms

Its a real pain in the tush to navigate rutted, debris-strewn paths with stock A-arms. Get SuperATVs Gravely Atlas JVS High-Clearance 1.5″ Rear Offset A-Arms to make every challenge easier. Our custom bend design gives you 1.5 of additional ground clearance and room for 30 tires without a lift! These A-arms are Built for Battle, designed to handle the harshest off-road conditions with superior durability.

• Fit 30 rear tires without a lift
• Bend design gives 1.5 of additional clearance
• 1.25 tubing is bigger and stronger than stock

A 1.5 Rear Offset for 30 Tires

Our Gravely Atlas A-arms give you a 1.5 rear offset. That offset gives you room for 30 tires and widens your wheelbase for improved stability. Even the deepest ruts wont hold you back with these A-arms.

An Extra 1.5 of Ground Clearance

These high-clearance rear control arms use a unique bend design to give you 1.5 of additional clearance. They move your A-arms out of the way so you can pass over taller obstacles without getting stuck.

Bigger and Stronger than Stock

We use 1.25 steel tubing to build these A-arms. Its bigger and stronger than stock and powder coated to prevent rust and corrosion.

Fine Tune Your Camber

Pivot blocks are key to controlling your Gravely Atlas’ camber. Thats why we include pre-adjusted pivot blocks on these rear A-arms. They come set to stock specs so you dont have to fool with them if you dont want to.

Backed for a Lifetime

Were so confident in these A-arms for the Gravel Atlas that we back them with a lifetime warranty. You can get to work with confidence knowing SuperATV will back you up.

• Adds 1.5 of rear offset
• Adds 1.5 of ground clearance
• Fit up to 30 tires
• 1.25 tubing is larger than stock
• Adjustable pivot blocks for full camber adjustability
• Utilizes stock A-arm bushings
• UV-resistant powder coat finish
• Easy to install
• Backed by a lifetime warranty

• Gravely Atlas JVS 3400 : 2023+
• Gravely Atlas JVS 6400 : 2023+

NOTE: 1″ wheel spacers are require if running these arms with a 3″ lift kit.